Details

---

The 9H90E geared motor is designed to provide precise motion control with a gearhead that changes the output shaft's direction of rotation in relation to the motor shaft. This is ideal for applications requiring specific rotational direction and controlled speed.

Key Features:

• Reverse Rotation: The output shaft’s rotation is opposite to the motor shaft's rotation. This is an essential feature for certain mechanical setups.
• Speed: The speed of the geared motor is based on the synchronous speed of the motor (1500 rpm at 50Hz and 1800 rpm at 60Hz). However, actual operating speed may be 2% to 15% lower than the theoretical speed, depending on the load applied.
• Gear Ratio Selection: When ordering, specify the gear ratio you need, as the gearhead is sold separately. The gearhead will provide torque multiplication based on the selected gear ratio.

Specifications of the 9H90E Geared Motor:

Item	Details
Model	9H90E
Motor Type	AC Gear Motor
Gear Ratio	Specify the gear ratio (e.g., 1:9, 1:10, etc.)
Rated Speed	1500 RPM (50Hz) / 1800 RPM (60Hz)
Output Shaft Rotation	Opposite of the motor shaft rotation
Bearing Type	Ball Bearing
Power Source	AC powered (depending on specific model)
Mounting Type	Flange Mount 90mm
Temperature Range	Operates within standard industrial temperature ranges
Applications	Automation, robotics, material handling, and applications requiring precise speed and torque control

Important Notes:

1. Actual Speed: The actual speed in operation may be 2% to 15% slower than the rated speed, depending on the load.
2. Gearhead Selection: Specify the required gear ratio (e.g., 1:9, 1:10, etc.) when ordering. The gearhead is sold separately from the motor.
3. Reversal of Rotation: The direction of rotation of the output shaft will be reversed compared to the motor shaft's rotation, which is a standard feature of the geared motor.