Fore Measurement Johor, Johor Bahru, JB, Malaysia

 
F381A

* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)

* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)

* Standard equipped with displacement input (A 2-dimensional waveform comparison is possible by using both force and displacement inputs)

* Save measurement data and setting values in an SD card

* Easy parameter setting allowed by direct touch on touch panel

* 4000 times/sec. high-speed digital processing

 

 

F388A

F388A

* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)

* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)

* Save measurement data and setting values in an SD card

* Easy parameter setting allowed by direct touch on touch panel

* 4000 times/sec. high-speed digital processing

 

 

 

F395

F395

* Waveform comparison function

* Visibility and operability improved by application of the color LCD and touch panel

* Communication function with control of sampled waveform uploaded to PC by spreadsheet software

* High-speed digital circuit with processing capability of 4000 times/sec. (max)

* 20 types of hold modes including peak, valley, relative maximum value, relative minimum value and inflection point are switchable by external signal

 

 

 

F372A

* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform

* Extensive Hold functions that enable holding an accurate point and OK/NG judgment function

* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included

* Easy and simple setting operation by directly touching touch panel

* Compact square DIN 96 size

* High-speed digital processing capability of 2000 times/sec.

 

 

F377A

* Directly connectable to Voltage±10V, Current±20mA

* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform

* Extensive hold functions that enable holding an accurate point and OK/NG judgment function

* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included

* Compact square DIN 96 size

* High-speed digital processing capability of 2000 times/sec.

 

 

F331

* Convenient DIN 96 x 48 mm size that can be easily mounted on control panel

* Standard built-in USB interface

* Special PC application software

* High-speed digital processing capability of 300 times/sec

* Equivalent input calibration function

 

 

 

F350

* Calculation and judgment outputs are available for 2ch input values of strain gauge type sensors

* Calculation functions (ch1+ch2, ch1-ch2, |ch1-ch2|, High select, Low select)

* 9 points of judgment outputs are equipped

* Sampling speed as high as 3000 times/sec. on each channel

* Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor

* Analog monitor output

 

 

F325

* Fast analogue peak hold

* Digital peak/sample hold

* High-speed digital circuit with processing capability of 3000 times/sec.

* You could chose either RS-485 ( Modbus-RTU /UNI-format) or SI/F(Unipulse original serial interface) as a standard interface

* The high-performance filtering functions by using both analogue and digital technology

* Free software for parameter setting is available

 

 

F340A

* Analog peak hold function providing high-speed peak hold

* Digital zero function for one-touch zeroing of indicated value

* Compact square DIN 96 size

* High-speed HI/LO limit comparison function

* Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor

 

 

 

F130

* Direct connection to OMROM SYSMAC CJ1/CJ2/NJ network system

* High-speed sampling of 3000 times/sec.

* Completely seamless communication between CJ1/CJ2/NJ and F130

* System development time is reduced and maintenance management modifications and servicing are easy

* With greatly simplified inter-equipment wiring, cost advantages can be expected

 

 

 

F490A

* Lightweight design of 290g for portable use

* Measurement data is recorded in CSV format in its internal memory

* Recorded data can be referred to and copied via USB interface

* Various display modes such as graphic display and recorded data display prepared

* Multi-calibration function that allows six calibration values to be stored and read

* 4 types of Hold functions can set the data observation range

 

 

FS10

* You can monitor the load cell outputs on PC easily

* 1200 times/sec. high-speed digital processing

* Pass/fail test (HH・HI・LO・LL)

* Easy to perform the initial setup and calibration

* Up to 10000 measurement and status data can be recorded

* The module is powered by USB, and it can supply excitation voltage to the connected load cell as well

 

 


1/1