Details

---

Parameters

1. Type: Two-phase hybrid closed-loop stepper servo motor (with encoder feedback, no step loss)
2. Flange size: 86×86mm (NEMA34)
3. Body length: 118mm
4. Holding torque: 8.5 N・m (torque you asked about earlier)
5. Rated phase current: 6A
6. Encoder: 1000-line incremental photoelectric encoder (1000-LS)
7. Shaft diameter: 14mm, keyway 5×25mm
8. Maximum speed: 300 RPM
9. Weight: 3.9kg

II. Driver: 2HSS86H (matching closed-loop driver)

1. Type: Digital DSP vector closed-loop stepper servo driver
2. Compatible with: 86 two-phase closed-loop stepper motor
3. Power supply: DC 30–75V / AC 24–80V
4. Output current: Maximum 8A
5. Pulse input frequency: 200KHz
6. Control method: Pulse + Direction (Pulse/Dir)
7. Subdivision: 400~51200 Adjustable
8. Functions: Real-time closed-loop position correction, overcurrent/overvoltage/overheat/tracking error alarm, low vibration and low heat generation

III. Complete System Description 

1. EDRIVE 2 Phase Closed Loop Stepper Motor System
2. EDRIVE Brand Two-phase closed-loop stepper motor system = 86J18118EC-1000-LS-YJ Closed-loop stepper motor
3. 2HSS86H Closed-loop servo driver
4. System Features
5. Closed-loop servo control: Real-time encoder feedback of position, completely eliminating step loss
6. Built-in internal torque monitoring and load detection functions
7. Low speed high torque, low high speed torque attenuation, low heat generation, low noise
8. Cost-effectiveness far lower than AC servos, accuracy close to servos
9. Widely used in: automated tightening, engraving machines, machine tools, conveying, and positioning equipment