Control Techniques Commander S100 Series AC Inverter for 0.75 kW (1 HP) 230V 3 Ph motor in V/F control to 4.2 A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC induction motor.

Frame 1: 68 mm Wide x 130 mm Deep x 156 mm High.
Enclosure Rating: IP20 (no covers supplied as terminals meet IP rating requirements)
Weight: 0.7kg.

Overload: 150% x 60 seconds
Speed Control Range: 0-300Hz
Braking: No Dynamic Braking (DBr)

Fixed Operator Keypad with 4 digit 7 Segment Display.
4 x Digital Inputs (1 Input suitable for 100 kHz pulse input), 2 x Analog Inputs, 1 x Digital Input or Digital Output (Multifunctional), 1 x Analog Output, 1 x Change Over Relay (Normally Open and Normally Closed)
Programmable via Smartphone or Tablet that support Nearfield communications (NFC). Marshal App is required see link below (Free Download. IOS or Android available)
Can be programmed in manufacturers packaging using NFC. Packaging indicates suitable location for programming.
Programmable via PC using free Connect software. RS485 converter required see linked products below
Fieldbus: Modbus RTU communications over RS485 included. RJ45 connector.

Max Input Current: 9.5A
Input Voltage: 200-240V Single Phase +/-10% at 50-60Hz
EMC Compliance: IEC EN61800-3 Catergory C3

Mounting: Panel mount at rear on 2 x 4.8mm on 145 mm x 45 mm centres or via 35 mm DIN rail.
Ambient: Rated 40°C (60°C with de-rating).
Ventilation space: 45 mm, above; 45 mm below; 0 mm at sides
Heat Loss: 24.7W at max output. 4.1W during standby.
Ecodesign Classification: IE2