Details
| GT-1EBA (Combination DI/DO, Sink Input/Source Output Terminal) | |
|
Input per module |
16 points sink type |
| Indicators | 16 green input status (with Switch) |
| On–state voltage |
24Vdc nominal |
| ON-state current |
2.2mA @ 24Vdc 2.5mA @ 26.4Vdc |
| Off-state voltage | 12.5Vdc @ 25℃ |
| Input signal delay |
OFF to ON : Max. 0.3ms typical ON to OFF : Max. 0.3ms typical |
| Input filter | Adjustable, up to 10ms |
| Nominal input impedance | 10.58K ohm typical |
| Common type | 16 points / 8 COM(Sink) |
| Output Specification | |
| Output per module | 16 points source type |
| Indicators | 16 green output status (with Switch) |
| Output voltage range |
24Vdc nominal |
| On-state voltage drop |
0.3Vdc @ 24Vdc |
| On-state min. current | Min. 1mA |
| Off-state leakage current | Max. 10uA |
| Output signal delay |
OFF to ON : Max. 0.3ms typical |
| Output current rating | Max. 0.3A per channel / Max. 4.8A per unit |
| Protection |
Over current limit : Typ. 12A @25℃ per each channels Thermal shutdown : Typical 175℃ @25℃ per each channels Short circuit protection |
| Common type |
16 points / 8 COM(source) |
| General Specification | |
| Power dissipation | Max. 55mA @ 5Vdc |
| Isolation | I/O to Logic : photocoupler isolation |
| Field power |
Supply voltage : 24Vdc nominal Voltage range : 15 ~ 26.4Vdc Power dissipation : 50mA @ 24Vdc |
| Wiring | I/O Cable Max. 0.33mm²(AWG 22) |
| Weight | 63g |
| Module Size | 12mm x 109mm x 70mm |
malfunction.
| Pin No. | Signal Description | ||
| C | B | A | |
| 0 | Common (Field Power 24V) | Input Channel 0 | Output Channel 0 |
| 1 | Common (Field Power 24V) | Input Channel 1 | Output Channel 1 |
| 2 | Common (Field Power 24V) | Input Channel 2 | Output Channel 2 |
| 3 | Common (Field Power 24V) | Input Channel 3 | Output Channel 3 |
| 4 | Common (Field Power 24V) | Input Channel 4 | Output Channel 4 |
| 5 | Common (Field Power 24V) | Input Channel 5 | Output Channel 5 |
| 6 | Common (Field Power 24V) | Input Channel 6 | Output Channel 6 |
| 7 | Common (Field Power 24V) | Input Channel 7 | Output Channel 7 |
| 8 | Common (Field Power 24V) | Input Channel 8 | Output Channel 8 |
| 9 | Common (Field Power 24V) | Input Channel 9 | Output Channel 9 |
| 10 | Common (Field Power 24V) | Input Channel 10 | Output Channel 10 |
| 11 | Common (Field Power 24V) | Input Channel 11 | Output Channel 11 |
| 12 | Common (Field Power 24V) | Input Channel 12 | Output Channel 12 |
| 13 | Common (Field Power 24V) | Input Channel 13 | Output Channel 13 |
| 14 | Common (Field Power 24V) | Input Channel 14 | Output Channel 14 |
| 15 | Common (Field Power 24V) | Input Channel 15 | Output Channel 15 |
iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at info@ims.com.my with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@ims.com.my with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.
Changes To This Privacy Policy
This Privacy Policy is effective as of 1st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.
No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 FAX: +607-8637240
MOBILE: +6019-6774477
EMAIL: info@ims.com.my | WhatsApp | www.ims.com.my
HOTLINE : 1700-818-330
whatsapp us now !
Return / Refund Policy : whatsapp us now !
Brand Name
| MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONIC| Apex Dynamics | NISSEI GTR | UNIPULSE | CREVIS
| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | Loadcell |PPC |
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at info@ims.com.my with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@ims.com.my with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.
Changes To This Privacy Policy
This Privacy Policy is effective as of 1st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.
View more about GT-1EBA Combination DI/DO on main site